Format 11 Series - Installing; Removing Wheels with Eccentrics; Installing I Removing Wheels with Nuts

6564
Installing / removing wheels with eccentrics
— Mount the bike horizontally on wheels.
— Open the eccentric clamp
— Under the weight of the bicycle, the wheel itself will t exactly in the landing ends of the fork.
— Close the eccentric clamp. The wheel must be xed with a closed quick release.
— If it is necessary to adjust the clamping force of the
eccentric, adjust it with the adjusting nut.
Installing / removing wheels with nuts
— Mount the bike horizontally on wheels.
Closed properly Incorrectly closed