Format kappa 30 - Noise Emission; Sliding Table Panel Saw Kappa 30; Sliding Table Panel Saw Kappa 40

Panel Saw
Kappa 30 / kappa 40
4.7 Noise emission















Attention: To keep the noise emission as low as possible, always used sharpened tools and use the correct
speed.



4.7.1 Panel Saw kappa 30
4.7.2 Panel Saw kappa 40
Acoustic power level according to EN ISO 3746 (Constants 4 dB(A))
 
 
Emission values at the workplace according to EN ISO 11202
 
 


Acoustic power level according to EN ISO 3746 (Constants 4 dB(A))
 
 
Emission values at the workplace according to EN ISO 11202
 
 


Specifications

