Format kappa 30 - Cleaning;Changing the Dust Brush of the Outrigger Arm; Sliding Table Scraper (Roller Cage)Renewal; Disassemble the Sliding Table

Panel Saw
Kappa 30 / kappa 40
Maintenance
10.7 Cleaning/changing the dust brush of the outrigger arm
Fig. 116: Dust brush (outrigger arm)
1. 
2. 

Adjust the dust brush:
 
 
 
 
Replace the dust brush:
 
 
 
 
!  #
"  $
10.8 Sliding table scraper (Roller cage) Renew
1. 

2. 
3. 
10.8.1 Dismantling the sliding table
Fig. 117: Base


1. 

!
"
#
$

!
"
#
$
!
"
#
$