To load the envelopes:
1. Move the side guides B apart as far as possible with thumb wheel A.
2. Place an envelope C in the envelope hopper flap down and trailing (bottom side of
envelope pointing to the system).
3. Fan a stack of envelopes and place them, also flap down and trailing, between the
side guides on top of the first envelope.
4. Move the side guides towards the envelopes with thumb wheel A. The space between
the side guides and the envelopes should be such that the envelopes have just enough
play to move freely.
30
| Page 30 | Jan-15-2019 03:21 | Loading the System
4
English
To Next Page
Loading...