Formlabs Form 2 - Troubleshooting and Repair by Skilled Persons; Disposal; Disassembly; Guidance for Recycling and Disposal

36 Disposal | 37
7.5 Troubleshooting and Repair by Skilled Persons
All steps that involve opening the Form 2 and/or investigating internal
components should be done by skilled persons under the guidance of
Formlabs or a certified distributor.
The following tools, equipment, and materials are needed for reparation tasks:
Task Required Supplies
Replacing the ABL Nut 2.5 mm hex wrench, replacement part(s)
Replacing the Button adjustable spanner wrench, needle nose pliers,
replacement part(s)
Replacing a Broken Cam Lock Spring 2 mm hex wrench, paper, replacement part(s)
Replacing the Cam Lock 2 mm hex wrench, replacement part(s)
Replacing the Cartridge Floor Assembly 2 mm L-shaped hex wrench, tool with a hook,
gloves, replacement part(s)
Replacing the Amber Cover 2 mm L-shaped hex wrench, replacement
part(s)
Replacing the Display Assembly 7 mm adjustable socket wrench, replacement
part(s)
Reseating the Galvanometer Cables 2.5 mm hex wrench
Reseating the LevelSense Grounding Screws 1.3 mm hex wrench, gloves, PEC*PADs
Replacing the Limit Switch 2.5 mm hex wrench, replacement part(s)
Replacing the Main Mirror 2.5 mm ball-head hex wrench, 2 mm hex
wrench, replacement part(s)
Replacing the Glass Optical Window 2 mm hex wrench, gloves, replacement part(s)
Adjusting the Pulley Set Screw 2 mm L-shaped hex wrench, 2.5 mm hex
wrench
Cleaning a Resin Spill 2.5 mm hex wrench, #1 Phillips head screwdriver,
paper towels and cotton swabs, IPA, NOVUS
Plastic Clean & Shine No. 1 and 2, syringes, ex-
ternal light, PEC*PADs, cardboard, nitrile gloves
Removing and Replacing the Shell 2.5 mm hex wrench, replacement part(s)
Reseating the Shuttle Motor Cable Housing 2.5 mm hex wrench
Reseating the SOM Board Connection 2.5 mm hex wrench
Adjusting the Tank Spring Fingers tweezers, 2 or 2.5 mm standard screwdriver
Adjusting the Wiper Belt Position 2 mm L-shaped hex wrench, 2.5 mm hex
wrench
Contact Formlabs or a certified distributor to receive instructions and
authorization for reparation tasks.
WARNING
8. Disposal
8.1 Disassembly
Contact Formlabs or a certified distributor to receive instructions and authori-
zation for reparation tasks, including how to disassemble or remove the shell
of the Form 2.
8.2 Guidance for Recycling and Disposal
8.2.1 Disposal of electronic components
The symbol on the product, the accessories, or packaging indicates that this
device shall not be treated as nor disposed of with household waste. When you
decide to dispose of this product, do so in accordance with local environmental
laws and guidelines. Dispose of the device via a collection point for the recycling
of waste electrical and electronic equipment. By disposing of the device in
the proper manner, you help to avoid possible hazards for the environment
and public health that could otherwise be caused by improper treatment of
waste equipment. The recycling of materials contributes to the conservation of
natural resources. Therefore do not dispose of your old electrical and electronic
equipment with the unsorted municipal waste.
8.2.2 Disposal of packaging waste
Keep the packaging for transportation. The Form 2 packaging materials are
designed to be kept and reused for transportation or shipping. The packaging is
made of cardboard and plastic-based materials. Dispose of packaging through
your local waste and recycling facilities. By disposing of the packaging waste
in the proper manner, you help to avoid possible hazards for the environment
and public health.