Page 13
3.2 Lifting the Chipper
The lifting eye is designed for securely holding the chipper’s weight only. Do not use
hoist hook directly on the lifting eye. Use a correctly rated safety shackle. Inspect
lifting eye before each use and do not use if damaged.
Ensure the chamber lid bolts are secure and tightened to the correct torque (86 Nm).
3.3 Storage of the Chipper
For safe storage of the chipper, ensure the following points are met:
1. Chipper to be stored on a level, even surface
2. Hand brake must be applied
3. Hopper tray to be in the ‘Up’ Position
To Next Page
Loading...
