Personalizing your Phone Page 6 FortiFone User Guide
Personalizing your Phone
How to navigate through menus
To access the configuration menu:
• Press the Menu softkey.
To select an item:
• Use the arrow keys to select an item and then press OK.
The bottom line of the display shows up to 4 softkey functions at a time. To return to a previous
menu, press the Prev. softkey.
To exit the configuration menu, press the Exit softkey.
Entering values with the dial pad and softkeys
Use the dial pad to input numbers, letters, special characters, and a period. The dial pad mode
is displayed above the second softkey as for numeric, for uppercase characters,
for lowercase characters and to be able to enter any of the characters.
To enter characters with the dial pad, use the digit with the desired character. Press the same
digit repeatedly until the desired character appears on the screen. After entering a character,
pause to allow the cursor to move to next character position.
Other special entries include:
• To enter a period or dot (for example, to input an IP address), press _ on the dial pad.
• To delete a letter in front of the cursor, press the Delete softkey.
• To enter special characters, press A on the dial pad while the mode softkey is set to ,
or .
• To enter a space, press : on the dial pad while the mode softkey is set to , or .
Prior to saving an entry, you may discard changes by pressing the Back softkey to move to the
previous menu.
To Next Page
Loading...
