Fortinet FON-375 - Call Waiting, DND, and Voicemail

Using the Phone Page 18 FortiFone User Guide
Blind transfer
Calls can be transferred without talking to the party receiving the transfer.
To perform a blind transfer:
1. Press the Xfer softkey.
2. Dial the extension or phone number.
3. Press the Dial softkey.
3-party conference
The phone supports conferencing with two other parties.
To create a 3-party conference:
1. Place the first call.
2. Press the Conf softkey, the first call will be placed on hold.
3. Call the second party for the conference.
4. When the second party answers, press the Conf softkey again.
To end a conference call:
1. Press the Split softkey to separate the parties from the conference.
2. Press the End softkey to end the conference call. Both parties will be disconnected.
Call waiting
When Call Waiting is enabled, the phone will present new calls to you while you’re on a call. In
order to use Call Waiting, it will first need to be enabled in the FortiVoice interface.
To answer an incoming call while on a call, press the flashing L1 or L2 key. Alternately, use the
navigation keys to view the caller and then press the Answer softkey. The initial call will be
placed on hold. Refer to the Hold section on how to toggle between calls.
DND
When DND (Do Not Disturb) is enabled, you will not be notified of incoming calls.
1. Press DND softkey to enable DND. The DND status icon will be displayed.
2. Press the DND softkey again to disable DND.
Voicemail
When you have a message waiting, the message indicator flashes and the voicemail icon
appears to indicate you have new messages in your mailbox.
To access your voice mailbox:
• Press or the View softkey.