22 01-28004-0028-20040830 Fortinet Inc.
Rear panel features Getting started
Figure 8: Power supply modules and power connectors
Cooling fan trays
The FortiGate-4000 chassis is cooled using four hot-swappable cooling fan trays.
Each tray includes one 10-cm ball bearing fan unit.
Figure 9 illustrates a cooling fan tray.
Figure 9: Cooling fan tray
Management module
Use the KVM switch module to switch serial connections to the CLI of each
FortiBlade-4010 module installed in the FortiGate-4000 chassis. To access the CLI,
connect the RJ-45 to DB-9 serial cable to the management module and to a
management PC. You can use the FortiBlade select buttons on the KVM switch
module (see “KVM switch module” on page 19) to select the FortiBlade-4010 module
that you can connect to.
ONON OFFOFF
ERRERR
Power supply
modules (7)
Power switch
Power on LED
Fan housing
Locking handle
Power
connectors
Locking strip
Locking screw
Locking screw
Fan handle
To Next Page
Loading...
