Switched interface configuration CLI commands
FortiGate-4000 Installation Guide 01-28004-0028-20040830 77
The following commands are available from the switched interface CLI:
pl
Display the link status of any switched interface port.
pl <port_no>
Example
Use the following command to display the link status the connection between the switched
interface and the FortiBlade-4010 unit in slot 1 of the FortiGate-4000 chassis.
pl 1
Use this command to display the link status the connection between the switched interface and
the LAN1 interface of the switched interface.
pl 10
pc
Enable (1) or disable (0) individual connections to the FortiBlade switched interface.
pc <port_no> {0 | 1}
Example
Use the following command to disable the connection between the switched interface
and the FortiBlade unit in slot 7.
pc 6 0
ps
Set the speed of any connection to the switched interface.
ps <port_no> {0|1|2}
• 0 set the port speed to 10 mbps
• 1 set the port speed to 100 mbps
• 2 set the port speed to 1000 mbps
Example
Use the following command to set the speed of the LAN2 port to 100 mbps.
ps 11 1
To Next Page
Loading...
