Load Balancing & Fault Tolerance Tunnel Routing
Status :
l Gray: Test is not started or test is complete.
l Blue: Waiting for test.
l Green: Testing.
l Red: Test is failed.
Without Traffic :
l RTT: Displays RTT value of both ends of tunnel. This value is tested with zero
traffic load.
l Packet Loss: Displays packet loss percentage. This percentage is tested with
zero traffic load.
With Traffic :
l RTT: Displays RTT value of both ends of tunnel. This value is tested with full
traffic load.
l Packet Loss: Displays packet loss percentage. This percentage is tested with full
traffic load.
Example 1
A company’s headquarter and two branch offices are located in different cities. Each office has a LAN, multiple WAN
links and a DMZ with VPN gateway:
Headquarter Branch 1 Branch 2
WAN1 1.1.1.1 2.2.2.2 6.6.6.6
107 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
