Fortinet FortiWAN - Tunnel Routing - Setting

Optional Services SNMP
Enable DNS Proxy : Turn on/off DNS Proxy.
Algorithm :
4 algorithms for routing (See "Load Balancing & Fault Tolerance"):
l By Weight: route the connections on every WAN link by weight.
l By Down Stream: always route the connection to the WAN link that has the
lightest downstream traffic.
l By Up Stream: always routes the connection to the WAN link that has the
lightest upstream traffic.
l By Total Traffic: always route the connection to the WAN link that has the
lightest total traffic.
WAN : Select the WAN links for specifying DNS servers and weight.
Weight : Give a weight on each WAN link. This field is visible when By Weight is selected in
Algorithm.
Server 1 : Specify the first DNS server on the WAN link.
Server 2 : Specify the second DNS server on the WAN link. This is an optional.
Server 3 : Specify the third DNS server on the WAN link. This is an optional.
Source : Connections established from the specified source will be matched.
Domain Name : DNS requests for the specified domain name will be matched.
SNMP
SNMP (Simple Network Management Protocol) is often used in managing TCP/IP networks by providing statistical
data regarding network performance and security. SNMP v1 to v3 protocols are supported in FortiWAN.
SNMP v1/2
Community : Enter the community which the SNMP belongs to.
System Name : Enter a string to represent this system.
System Contact : Enter a string to represent a person in charge of this system.
System Location : Enter a string to represent the location of this system.
SNMP v3
Community : Enter the community which the SNMP belongs to.
141 FortiWAN Handbook
Fortinet Technologies Inc.