Statistics Traffic
Statistics
This topic deals with FortiWAN network surveillance system. Comprehensive statistics are collected to monitor
networking status, bandwidth usage of traffic class, and dynamic IP WAN link. These data offer deep insight into the
network, and help detect unexpected network failures, boosting network reliability and efficiency.
Traffic
It sorts and displays real-time traffic of traffic class over WAN link. Select traffic direction (inbound/outbound) in Traffic
Type to view statistics.
The table below shows 3 sorts of statistics:
l Maximum/Minimum bandwidth allocation and priority
l Traffic for the last 3 seconds
l Traffic for the last minute
The statistics are analyzed based on individual WAN connection and traffic direction. To view statistics, select from
Traffic Type (Inbound/Outbound), traffic direction and WAN Link number.
Traffic Type : Traffic flow direction: inbound and outbound.
WAN Link : The number of WAN links for inspection.
Automatic Refresh : Time interval to refresh statistical table.
Traffic Class : The name of the traffic class defined on Inbound/Outbound Bandwidth Management
page. Among these, unclassified classes are labeled as “Default Class”.
Min. ~ Max.(Priority) : The maximum/minimum traffic volume allowed for a specific traffic class of different
priority levels.
3-Second Statistics : Displays packet numbers or traffic flow volume in Kilobyte/sec for the last 3 seconds.
1-Minute Statistics : Displays packet numbers or traffic flow volume in Kilobyte/sec for the past 60
seconds.
Top 10 : Displays the data flow for the last five seconds with corresponding IP address. Stat-
istics can be ranked by By Source and By Destination.
Bandwidth
Unlike traffic statistics in previous section that focuses on real-time monitor of network status, statistics in BM
(Bandwidth Management) is intended for long-term analysis. For particular traffic class in a given traffic direction,
143 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
