Statistics Connection Limit
Connection Limit
It enables administrators to inspect the number of established connections in real-time and to justify the maximum
number of connections allowed on [Service] -> [Connection Limit] page, to avoid network congestion.
Automatic Refresh : Select auto-refresh interval, or disable the function.
No. : Numbering of IP addresses based on the number of connections established.
IP : Shows the source IP of the connection.
Connections : Shows the number of connections established.
Virtual Server Status
It displays status and statistics regarding virtual server defined in Service/Virtual Server.
Automatic Refresh : Enable it and choose time interval for refreshing.
Virtual Server Status : Green = OK; Red= Failed.
WAN IP : Displays WAN IPs defined in the rules on Service/Virtual Server page.
Service : Displays services defined in the rules on Service/Virtual Server page. These services
are those available for virtual servers.
Server IP : Displays server IPs defined in the rules on Service/Virtual Server page. The server IPs
denote those in real network usage.
Detect : Displays detection method, TCP or ICMP.
Status : Displays detection result.
FQDN
The IPv4 and IPv6 addresses of the FQDNs that connected via FortiWAN are shown in this page.
IPv4 FQDN
FQDN : The FQDN connected via FortiWAN.
147 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
