Bandwidth Usage Reports
l This page and this table describe total traffic volume, not traffic rate. Data transferred are measured in
KBytes, MBytes or GBytes over the period of time selected.
l
Drill in (See "Drill In"):
l Clicking the magnifier icon located under the “Drill in” column in the statistics table allows you to perform an
additional ‘drill-down’ analysis on traffic for the selected service, shown by In Class, Out Class, WAN,
Internal IP, External IP, Internal Group, External Group and Traffic Rate (Trend) via the selected service:
l In Class – In Classes where this Service traffic is classified into.
l Out Class – Out Classes where this Service traffic is classified into.
l WAN – WAN links that this Service traffic passed through.
l Internal IP – Any monitored internal IP addresses that are associated with this Service.
l External IP – Any monitored external IP addresses that are associated with this Service.
l Internal Group – Any monitored internal IP group (set up under the Settings menu) that the internal IP
addresses are associated with this Service.
l External Group – Any monitored external IP group (set up under the Settings menu) that the external IP
addresses are associated with this Service.
l Traffic Rate: bandwidth distribution generated by this Service by the date range defined.
Internal IP
This report shows the statistics of traffic passed through FortiWAN by Internal IP addresses.
Create a report for a specific day or over a range of dates (See "Create a Report").
Export reports and send reports through email (See "Export and Email").
l Pie Chart: Pie chart of traffic statistics is generated based on traffic incurred (as a source or termination) by Internal
IP addresses.
l Bar Chart: Bar chart statistics show the actual data volume used by the top 10 Internal IP addresses.
l Statistics Table:
l List the Internal IP addresses generating (as a source or termination) the most traffic.
l IP: The Internal IP addresses.
l Inbound Bytes: The volume of inbound traffic of the Internal IP addresses.
l Outbound Bytes: The volume of outbound traffic of the Internal IP addresses.
l Total Bytes: The volume of total traffic of the Internal IP addresses (Inbound Bytes + Outbound Bytes).
l Note: Select “Inbound Bytes”, “Outbound Bytes” or “Total Bytes” as primary sorting by clicking on the
column title. A “▲” is shown aside the column header while the column is selected as primary sorting, e.g.
Inbound Bytes ▲.
l % Total Bytes: The volume of total traffic of the Internal IP addresses in %.
l % Inbound Bytes: The volume of inbound traffic of the Internal IP addresses in %.
l % Outbound Bytes: The volume of outbound traffic of the Internal IP addresses in %.
l Only one of the three statistics data (% Inbound Bytes, % Outbound Bytes, or % Total Bytes) will be
displayed in the statistics table depending on the primary sort column.
l This page and this table describe total traffic volume, not traffic rate. Data transferred are measured in
KBytes, MBytes or GBytes over the period of time selected.
l
Drill in (See "Drill In"):
l Clicking the magnifier icon located under the “Drill in” column in the statistics table allows you to perform an
additional ‘drill-down’ analysis on traffic for the selected Internal IP address, shown by In Class, Out Class,
FortiWAN Handbook
Fortinet Technologies Inc.
166
To Next Page
Loading...
