Bandwidth Usage Reports
only, which might not match the percentage value listed in the Statistics Table. Use it only as a visual reference to
see who the major users are.
l Bar Charts illustrate the total volume of each traffic pattern shown on the page, and the percentage of each traffic
pattern out of total traffic. The Bar Chart display will change depending upon which column in the Statistics Table is
selected for primary sorting.
l The Statistics Table is the numerical presentation of the same information illustrated in the Pie chart and Bar
Charts. The traffic statistics includes information of total traffic, inbound traffic, outbound traffic and percentage of
total traffic.
l Inbound Bytes: The volume of traffic originating from outside of FortiWAN, going into the internal network.
l Outbound Bytes: The volume of traffic originating from inside of FortiWAN, going to the external network.
l Total Bytes: (Default primary sorting) The volume of total traffic = Inbound Bytes + Outbound Bytes.
The statistics table lists 10, 20, 50 or 100 entries sorted by default in declining order by total data volume. By default
the first screen shows the top 10 entries, but navigation buttons and a direct-entry page box at the lower right corner of
the screen allow you to examine all items found. The default number of rows to be listed on the report page can be
defined in account settings.
The Statistics Table may be re-sorted by Inbound Bytes, Outbound Bytes or Total Bytes, by selecting the appropriate
column header. The Pie and Bar charts will reformat to reflect the selected traffic measurement.
Note that the percentage of total traffic shown in the Statistics Table may not be the same as that shown on the Pie
Chart. The Statistics Table shows the percentage of total traffic in all traffic patterns, while the Pie Chart only shows
the total of the top 10 traffic users.
See also:
l
Report: Inclass
l
Report: Outclass
l
Report: Service
l
Report: WAN
l
Report: Internal IP
l
Report: Traffic Rate
Inclass
This report shows the statistics of each inbound class as defined in FortiWAN’s Bandwidth Management function (See
"Bandwidth Management"). Each class is a classification (by service, by IP address and etc.) of incoming traffic passed
through FortiWAN. This statistic will help you realize if the Bandwidth Management policies of FortiWAN are running
well, or if any adjustment is necessary for the specified bandwidth class.
Create a report for a specific day or over a range of dates (See "Create a Report").
Export reports and send reports through email (See "Export and Email").
l Pie Chart: Pie chart of traffic statistics is generated based on Inbound Classes of FortiWAN’s Bandwidth
Management.
l Bar Chart: Bar chart statistics show the actual data volume used by the top 10 Inbound Classes.
l Statistics Table:
l List the Inbound Class the most traffic being classified into.
l In Class: The Inbound Classes defined in FortiWAN.
l Inbound Bytes: The volume of inbound traffic of the Inbound classes.
FortiWAN Handbook
Fortinet Technologies Inc.
162
To Next Page
Loading...
