Advanced Functions of Reports Reports
l Access: the counts of accessing this domain by external users via the WAN IP address.
l Note: Select “FQDN”, “WAN” and “WAN IP” as primary sorting via clicking on the column title. A “▲” or “▼” is shown
aside the column header while the column is selected as primary sorting, e.g. FQDN ▲. The sorting order will be
switched by clicking on the same column header.
Advanced Functions of Reports
Reports provides advanced functions beyond the basic reports to give an accurate analysis. Drill In and Custom Filter
are the functions about querying the reports with complex conditions. It delivers only the data that a user needs from
large data sets. Export and Report Email are the functions about documentations and delivering of the on-line reports.
The details of the advanced functions are described as follows.
Drill In
There are 7 different query conditions for Bandwidth Usage, including In Class, Out Class, WAN, Service, Internal IP,
External IP and Traffic Rate. In every Bandwidth Usage report, analysis can be further drilled-in to include more traffic
data statistics; in other words, Reports allows traffic to be queried based on combination of multiple conditions. For
example, select Service as the query subject from the menu in the category area, and the Service report will be
displayed accordingly, as shown below:
FortiWAN Handbook
Fortinet Technologies Inc.
170
To Next Page
Loading...
