Summary System Configurations
System Configurations
This topic elaborates on [System] and its submenus. Simple examples are given to illustrate how to configure [system]
settings.
Summary
As soon as you log in to the web UI, you will see the [System/Summary].It shows you basic information on the system,
including [System Information], [Peer Information],and [WAN Link State]. [Peer Information] is populated as soon as
HA mode becomes active. As is mentioned in "FortiWAN in HA (High Availability) Mode", HA (High Availability) is hot
backup. In HA mode, one FortiWAN is the primary system while the other is the backup system.
System Information / Peer Information
System Information
Version : The firmware version of the device.
Model/Max Bandwidth : The model and Max. bandwidth of the device.
Serial Number : The serial number of the device.
Uptime : The time the device has been up and running.
Connections : The number of connections.
CPU Usage % : The CPU usage in percentage.
Packets/Second : The number of the packets that are processed per second.
VRRP State : The state of VRRP (Virtual Router Redundancy Protocol) - whether it is enabled.
Note: When VRRP is enabled, HA will be disabled, and vice versa. (See "LAN
Private Subnet")
Hard Disk : FortiWAN's hard disk for Reports is being consumed by increasing report data-
base. Once the disk space is used up, Reports will fail to continue log pro-
cessing. This field monitors the disk space status of Reports by displaying the
total space and consumed space. (See "Reports")
Peer Information
Version : The firmware version of the slave.
FortiWAN Handbook
Fortinet Technologies Inc.
64
To Next Page
Loading...
