What's new Scope
l
HA Port Change - FortiWAN supports one GE RJ45 HA Port. This port must be direct-cabled via
Ethernet cable, to a second FWN unit HA port for HA operation. HA will not interoperate between
AscenLink and FortiWAN and will not interoperate between different FortiWAN models.
l
HDD - FWN 200B adds an internal 500BG HDD for Reports data storage. See below for more
information on Reports.
l
HA Configuration Synchronization - Two FWN 200B appliances can be connected in active-passive
High Availability mode via an Ethernet cable between the systems' HA RJ-45 ports.
l
New Functionality - FortiWAN 4.0.0 has the same functionality as AscenLink V7.2.2 PLUS the
addition of built-in Reports which is the equivalent functionality to the external LinkReport for AscenLink.
l
Reports - Reports captures and stores data on traffic and applications across all WAN links in the
system. Reports include connections, link and aggregate bandwidth, link and VPN reliability, and data
on Multi-Homing requests, Virtual Server (SLB) requests, and more. Reports can be viewed on-screen,
exported to PDF or CSV files or emailed immediately in PDF or CSV format.
l
GUI - FWN 4.0.0 adopts the Fortinet "look and feel".
l
Hardware Support - FortiWAN 4.0.0 for FortiWAN supports FortiWAN 200B. AscenLink series models
are not supported.
13 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
