Fortinet FortiWAN - Page 134

Bandwidth Management Optional Services
Settings for BM classes above
Name Link Busy Hour Settings Idle Hour Settings
Guaranteed
Kbps
Max Kbps Priority Guaranteed
Kbps
Max Kbps Priority
Mail Server WAN1 0 128 Normal 0 512 Normal
WAN2 0 128 Normal 0 512 Normal
WAN3 0 64 Normal 0 512 Normal
For LAN Zone WAN1 0 128 Low 0 128 Low
WAN2 0 128 Low 0 128 Low
WAN3 0 256 Low 0 512 Low
For
192.168.0.100
WAN1 100 200 Normal 0 512 Normal
WAN2 50 100 Normal 0 512 Normal
WAN3 50 100 Normal 0 512 Normal
FTP Server WAN1 0 128 Low 0 256 Low
WAN2 0 128 Low 0 256 Low
WAN3 0 256 Low 0 512 Low
Filter Settings
Source Destination Service Classes
211.21.48.198 WAN FTP(21 FTP Server
211.21.48.197 WAN POP(110) Mail Server (POP3)
192.168.0.100 WAN FTP(21) For 192.168.0.100
211.21.48.198 10.10.10.0/255.255.255.0 Any For 10.10.10.0
Two possible scenarios for upstream data: e.g. FTP (scenario 1), is that local host uploads data from a remote FTP
server in the WAN. The other scenario is a remote user in WAN downloads data from a FTP server in the LAN. Both of
these scenarios are sending data from LAN to WAN. Thus configuring BM rules for these two scenarios on the inbound
BM page is necessary.
FortiWAN Handbook
Fortinet Technologies Inc.
134