Advanced Functions of Reports Reports
in to query what External IP addresses it is connected to by clicking the Drill In magnifier icon in the row of
125.227.251.80 IP listed in the table and select External IP (query result is as shown below):
As indicated in the blue box (shown in the figure above), this page presents the data of External IP report that includes
the traffic of WAN 2 (WAN) at internal IP=125.227.251.80 (Internal IP) using HTTPS(TCP@443) (Service).
From the example illustrated above, administrators can easily query the traffic flow based on combination of various
conditions needed, while analysis can be drilled in to more details for better review. In the upper section of the report
page, you’ll see a summary of the query conditions used in the existing report (highlighted in blue as shown in the
image above), making it clear for administrators to keep track of the query details.
Continuing the example described above, the query submitted returns a result that the IP address: 125.227.251.80 via
WAN 2 is connecting to External IP addresses, via the HTTPS(TCP@443) service. You can change the last Drill In
condition (External IP) to a different one (such as traffic rate of bandwidth usage) using the same filter: WAN=2,
Internal IP=125.227.251.80 and Service=HTTPS(TCP@443), by selecting Traffic Rate from the drop-down menu of
External IP (as shown below):
FortiWAN Handbook
Fortinet Technologies Inc.
172
To Next Page
Loading...
