How to set up your FortiWAN Web UI Overview
IPv4/IPv6 Range : Matches sessions coming from or going to a continuous range of IP addresses.
e.g. 192.168.1.10-192.168.1.20.
IPv4/IPv6 Subnet : Matches sessions coming from or going to a subnet.
e.g.192.168.1.0/255.255.255.0.
WAN : Matches sessions coming from or going to WAN.
LAN : Matches sessions coming from or going to LAN.
DMZ : Matches sessions coming from or going to DMZ.
Localhost : Matches sessions coming from or going to FortiWAN.
Any Address : Matches all sessions regardless of its source or destination.
FQDN : Matches sessions coming from or going to FQDN.
IP Grouping Name : Matches sessions coming from or going to the IP addresses that predefined in IP
groups (See "IP Grouping").
Configuration on Service
This is for filtering the established sessions running specified service. It contains some well-known services for options
and user-defined services (TCP@, UDP@ and Protocol#):
l FTP (21)
l SSH (22)
l TELNET (23)
l SMTP (25)
l DNS (53)
l GOPHER (70)
l FINGER (79)
l HTTP (80)
l POP3 (110)
l NNTP (119)
l NTP (123)
l IMAP (143)
l SNMP (161)
l BGP (179)
l WAIS (210)
l LDAP (389)
l HTTPS (443)
l IKE (500)
l RLOGIN (513)
l SYSLOG (514)
l RIP (520)
l UUCP (540)
27 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
