Configuring Network Interface (Network Setting) How to set up your FortiWAN
Examples of Basic Subnets
[Basic Subnet]: Subnet in WAN
This topology is frequently found where cluster hosts on a IPv4 public subnet are deployed in WAN.
As described in the topology, FortiWAN uses port2 as WAN port with IP address 203.69.118.10. Its netmask obtained
from ISP is 255.255.255.248, and the router's IP address 203.69.118.9. IP addresses that are unlisted in [IP(s) on
localhost], 203.69.118.11 – 203.69.118.14 in this case, can be used for hosts in the subnet in WAN. In this case, IP
addresses 203.69.118.9 – 203.69.118.14 are treated as in near WAN.
[Basic Subnet]: Subnet in DMZ
This topology is frequently found where a cluster of hosts in an IPv4 subnet are deployed in DMZ. Base on the
topology introduced previously, click the [+] button to add a subnet in DMZ. Remember a subnet in DMZ must
coexist with a subnet in WAN or a subnet in WAN and DMZ.
FortiWAN Handbook
Fortinet Technologies Inc.
38
To Next Page
Loading...
