Fortinet FortiWAN - disablefw: Disable all the firewall rules; enforcearp: Force FortiWANs surrounding machines to update their ARP tables; export: Display configurations of NAT, Multihoming and Virtual Server; get: Get the version and serial number information of a FortiWAN apparatus

How to set up your FortiWAN Configuring Network Interface (Network Setting)
As described in the UI, the subnet as a whole is assigned to Virtual Server for use. Enter subnet IP address in [Network
IP] and netmask 255.255.255.248 in [Netmask].
Examples of Static Routing Subnets
[Static Routing Subnet]: Subnet in WAN
This topology is rarely seen in actual network where static routing subnet is located on the WAN. In other words, the
subnet in WAN does not connect to FortiWAN directly, but needs a router instead to transfer packets. In this example,
a subnet 139.3.1.8/29 is located on the WAN and connects to router 203.69.118.9, while another subnet
203.69.118.8/29 is located on the WAN as well, but connects to FortiWAN directly. The configurations here indicate
how FortiWAN to route packets to subnet 139.3.1.8/29.
41 FortiWAN Handbook
Fortinet Technologies Inc.