Name: Foscam D4Z
Brand: Foscam
Rating: 5 (1 reviews)

To Next Page

To Previous Page

105

(2) Press and hold reset button of camera for 30 second, till it reboots. Reset button is on bottom, or back, or

end cords of the camera.

(3) Once reset, camera will be restored to default settings. And default username / password will then

become admin / random password on the MAC sticker. Please save your MAC sticker.

5.1.3 How to setup alarm recording to SD card

For the cameras that support Micro SD card, we can save alarm recording on SD card and below are the steps

to set it up:

Step 1: Setup the Motion Detection Settings

Please go to Device Settings > Detector > Motion Detection menu.

(1) Click ON for the Detection swich.

(2) Choose Recording for the Action.

(3) Set the Detection Area

(4) Set a Schedule.

(5) Click Save to save the settings.

Questions and Answers:

Need help?

Do you have a question about the Foscam D4Z and is the answer not in the manual?

Foscam D4Z Specifications

General