3.7.4.6 P2P
Access the camera by smart phone (Android or iOS operating system), please refer to the Quick Setup
Guide.
First of all, you need to open the P2P function of the camera at Settings > Network > P2P.
3.7.4.7 Onvif
By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1
and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.
3.7.5 Video
This section allows you to configure Video stream settings, On screen display and Snapshot settings.
3.7.5.1 Video Settings
There are two ways to set the stream video settings. They are main stream video settings and sub
stream video settings.
To Next Page
Loading...
