Foscam D4Z - Page 47

45
③ Press the left mouse and drag it on the time boxes, you can select the serial area,
7 Click Save button to take effect. When the motion is detected during the detection time in the detection
area, the camera will alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
3.7.6.2Sound Detection
When the ambient sound over a certain decibel ,the sound alarm will be triggered.
If the Sensitivity is set to “High”, the camera will detect the sound whose more than 55db.
If the Sensitivity is set to “Medium”, the camera will detect the sound whose more than 65db.
If the Sensitivity is set to “Low”, the camera will detect the sound whose more than 75db.