6. Press the left mouse and drag it on the time boxes, you can select the serial area,
7 Click Save button to take effect. When the sound is detected during the detection time in the detection area,
the camera will alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
4.6.6 PTZ
This page will allow you to change the pan/tilt speed and do cruise tracks settings.
4.6.6.1 PTZ Parameters
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ
speed type and click save button.
To Next Page
Loading...
