There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the
order of preset points or add/delete one preset points in one cruise track.
: Select one preset points and add it to the selected cruise track.
: Select one preset points you have added to one cruise track, click delete.
Attention:
Considering the life time and thermal issue of the motor, it‟s not recommend to do long-time cruise.
4.6.6.3 Start-Up Options
Here section will allow you to set the stop position after the camera reboots.
It supports three modes: No self test, Goto home position and Goto preset point.
Disable Start-up: When rebooting, the camera will not pan / tilt.
Goto home position: When rebooting, the camera will pa Providing Central Management Software to
manage or monitor multi-cameras n / tilt and stops at center.
Go to Preset pointion: Select one preset position and save it. When rebooting, the camera will pan/ tilt and
stops at the preset position you have set.
To Next Page
Loading...
