6.8.2 Register New Transmitter
Press and hold the LIGHT /SNOOZE button for 5 seconds, and the
console will re-register the wireless sensor.
6.8.3 Backlight Operation
1) With AC adaptor.
The backlight can only be continuously on when the AC adapter is
permanently on. When the AC adapter is disconnected, the backlight
s between High,
tor
lly
ll not send data to the Internet if no key is
ep mode or plug
ature or
d
2:30 ….. etc
mperature Pressure
can be temporarily turned on.
Press the LIGHT SNOOZE key to adjust the brightnes
Low and Off.
2) Without AC adap
To reduce power consumption, the display console will automatica
enter sleep mode and wi
pressed for 15s. Hold the LIGHT /SNOOZE key in sle
in the DC adapter wake up equipment.
6.8.4 Tendency indicators
Tendency arrows allow you to quickly determine of temper
pressure are rising and falling in a three hour update period, update
every 30 minutes.
g. : At 3:00 - compare to 12:00 data; at 3:30 -compare to 1E
Tendency
indicators
Humidity Te
3%
Rising Rising > 1hpa
Rising > Rising >=
1C/2F
<=
Steady
Change Chang
3% 1C/2F
Chan
e <
ge <= 1hpa
Falling
3% 1C/2F
Falling > 1hpa
Falling > Falling >=
26