Problem Solution
Use the calibration feature to offset installation
issues related to radiant heat sources. Reference
Section 6.7.
Relative pressure
does not agree
with official
reporting station
You may be viewing the absolute pressure, not the
relative pressure.
Select the relative pressure. Make sure you properly
calibrate the sensor to an official local weather
station. Reference Section 6.4.6 for details.
Rain gauge reports
rain when it is not
raining
An unstable mounting solution (sway in the
mounting pole) may result in the tipping bucket
incorrectly incrementing rainfall. Make sure you
have a stable, level mounting solution.
Data not reporting
to Wunderground.
1. Confirm your password or ey is correct. It is
the password you registered on
Wunderground.com. Your
Wunderground.com password cannot begin
a
2. Confirm your station ID is correct. The
station ID is all caps, and the most common
issue is substituting an O for a 0 (or visa
versa). Example, KAZPHOEN11, not
KAZPH0EN11
3. Make sure the date and time is correct on
the console. If incorrect, you may be
reporting old data, not real time data.
ot
e
k
com
with a non-alphanumeric character (
limitation of Wundeground.com, not the
station). Example, $oewkrf is not a valid
password, but oewkrf$ is valid.
4. Make sure your time zone is set properly. If
incorrect, you may be reporting old data, n
real time data.
5. Check your router firewall settings. Th
56
To Next Page
Loading...