A
BOUT
THE
S
WI TCH
2-8 © 2003 Foundry Networks, Inc. February 2003
Figure 2-4. Power Supply Receptacle
Features and Benefits
Connectivity
• 24 dual-speed ports for 10 or 100 Mbps Ethernet connections
• Auto-negotiation enables each RJ-45 port to automatically
select the optimum communication mode (half or full duplex)
for the attached device
• Independent RJ-45 ports with support for automatic MDI/
MDI-X
• Unshielded (UTP) cable supported on all RJ-45 ports:
Category 3, 4 or 5 for 10 Mbps connections and Category 5 for
100 Mbps connections
• IEEE 802.3 Ethernet and 802.3u Fast Ethernet compliance
ensures compatibility with standards-based hubs, network
cards and switches from any vendor
• Provides stacking capability via a module with 1 Gbps
stacking bandwidth. Up to 8 units can be stacked.
• Two 10/100/1000BASE-T auto-sensing Gigabit Ethernet
switching ports that operate in combination with two Small
Form Factor Pluggable (SFP) transceiver slots
100-240V~
50/60Hz, 2A
To Next Page
Loading...
