I
NST A L LI NG
THE
S
WI TCH
4-2 © 2003 Foundry Networks, Inc. February 2003
suppressor is recommended.
Equipment Checklist
After unpacking the switch, check the contents to be sure you
have received all the components. Then, before beginning the
installation, be sure you have all other necessary installation
equipment.
Package Contents
•24-Port Fast Ethernet Switch
•Four adhesive foot pads
• Bracket Mounting Kit containing two brackets and four
screws for attaching the brackets to the switch
• Power Cord
• RS-232 console cable
•Stacking Cable
• CD-ROM containing installation guide and user guide
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the
following equipment available:
• Four mounting screws for each device you plan to install in a
rack—these are not included
• A screwdriver (Phillips or flathead, depending on the type of
screws used)
To Next Page
Loading...
