Need help?Do you have a question about the Foundry Networks FES2402 and is the answer not in the manual?
Overview of Foundry Networks FastIron compact switch families, including features.
Details physical characteristics of Foundry FES, FESX, and FWSX switch models.
Information on power supplies supported by FastIron compact switches, including specifications.
Key steps and references for installing a FastIron compact switch.
Safety and handling guidelines for installing Foundry network devices.
Procedures for powering on and verifying the proper operation of the FastIron switch.
Steps for assigning IP addresses to switch interfaces for network management.
Methods for verifying network connections, including ping and LED observation.
How to display and adjust temperature warning and shutdown levels on FES switches.
Details on managing temperature thresholds and fan speed for X Series switches.
General| Model | FES2402 |
|---|---|
| Product Family | FastIron Edge Switch |
| Switching Capacity | 12.8 Gbps |
| Forwarding Rate | 9.5 Mpps |
| Jumbo Frame Support | Up to 9, 216 bytes |
| RAM | 128 MB |
| Flash Memory | 16 MB |
| Type | Managed |
| Power Supply | AC 100-240V |
| Operating Temperature | 0°C to 40°C |
| Management | Web-based, CLI, SNMP |
| Features | VLAN, QoS, Spanning Tree, IGMP Snooping |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z |
| Ports | 24 x 10/100Base-TX, 2 x 10/100/1000Base-T/SFP combo ports |
| Dimensions (W x D x H) | 44.0 x 25.4 x 4.4 cm |
To Next Page
