Foundry Hardware Installation Guide for the FES, FESX, and FWSX
2 - 4 © 2008 Foundry Networks, Inc. December 2008
• FastIron Edge Switch 2402-POE-WLAN
• FastIron Edge Switch 4802-POE-WLAN
IPv6 Support
FESX IPv6 (FESX6) compact models support the 128-bit addressing format and full Layer 2 and base Layer 3
switching.
The following IPv6 premium models were introduced with software release 04.1.00:
• FESX624E-PREM6
• FESX624HFE-PREM6
• FESX648E-PREM6
These models, along with software release 04.1.00, provide additional support for full Layer 3 IPv6 and IPv4
routing protocols, as well as IPv6 host and management features.
The following IPv6 models were introduced with software release 04.0.01:
• FESX624
• FESX624HF
• FESX648
These models can be upgraded to support either IPv4 routing only or IPv6 and IPv4 routing, depending on the
Layer 3 upgrade PROM installed in the device. For more information, see the chapter “Layer 3 Upgrade
Procedures” on page A-1.
For hardware details about the IPv6 compact models, see the following sections in this chapter:
• “FESX424, FESX624, FESX624E-PREM6 and FWSX424” on page 2-6
• “FESX424HF, FESX624HF, and FESX624HFE-PREM6” on page 2-7
• “FESX448, FESX648, FESX648E-PREM6 and FWSX448” on page 2-8
Hardware Features
This section describes the physical characteristics of the Foundry FES, FESX, and FWSX. For details about
physical dimensions, power supply specifications, and pinouts, see the chapter “Hardware Specifications” on
page 7-1.
FES2402, FES4802, FES9604
The FastIron Edge Switch (FES) family provides high 10/100 port density and 10/100/1000 Gigabit Ethernet
uplinks in a compact form factor.
• The FES2402 has 24 10/100 ports and two Gigabit uplink ports.
• The FES4802 has 48 10/100 ports and two Gigabit uplink ports.
• The FES9604 has 96 10/100 ports and four Gigabit uplink ports.
To Next Page
Loading...
Need help?
General
