Product Overview
December 2008 © 2008 Foundry Networks, Inc. 2 - 17
Table 2.4: Network Interfaces
Power Supplies
Each FastIron compact switch comes with one alternating-current (AC) or direct-current (DC) power supply,
depending on how it was ordered from the factory. All models have two power supply slots, enabling you to install
a second power supply for redundancy. Direct-current (DC) supplies are available for some devices, in which you
can use any combination of AC and DC supplies in the same device. The following table lists the power supplies
that may be installed in a FastIron compact switch.
Table 2.5 and Table 2.6 show which Foundry power supply can be installed on each Foundry FastIron compact
product.
Interface Show Media Description
1000Base-BX-D M-GBXD
1000Base-BX-U M-GBXU
1000Base-CWDM
Cxxxx
1
1. xxxx denotes the wavelength. For example, C1550.
1000Base-LHA M-LHA
1000Base-LHB M-LHB
1000Base-LX M-LX
1000Base-SX M-SX
1000Base-SX2 M-XR or M-SX2
1000Base-T M-C
100Base-BX M-FBXD or M-FBXU
100Base-FX M-FX, M-FXB1, or M-FXB2
100Base-FX-IR M-FX-IR
100Base-FX-LR M-FX-LR
100Base-FX-SR M-FX-SR
100Base-TX
2
2. Supported on copper ports only.
M-TX
10GBase-1310-MMF 1310-MMF
10GBase-CX4 XG-CX4
10GBase-ER XG-ER
10GBase-LR XG-LR
10GBase-SR XG-SR
10GBase-ZR XG-ZR
10GBase-ZRD XG-ZRD
To Next Page
Loading...
Need help?
General
