Need help?Do you have a question about the Foundry Networks FastIron LS 624 and is the answer not in the manual?
General| Brand | Foundry Networks |
|---|---|
| Model | FastIron LS 624 |
| Category | Switch |
| Language | English |
This guide describes the FastIron LS Layer 2 Compact Switch and its hardware installation.
Details the software release covered in this edition of the guide.
Defines the intended readers for this installation guide.
Explains the typographical conventions used throughout the document.
Lists supplementary Foundry Networks documents for further information.
Provides contact information for Foundry Networks technical support.
Describes the physical characteristics and port density of FLS624 and FLS648 models.
Details management interfaces like Console port and the reset button.
Lists supported network ports, connectors, and interface types.
Explains 10GbE uplink modules, CX4 ports, and their specifications.
Defines the meaning and states of various device LEDs for status indication.
Discusses the integrated AC and optional redundant power supply units.
Lists the items included in the FastIron LS system package for verification.
Specifies necessary items for serial connection and system management.
Outlines the sequential steps required for installing the FastIron LS switch.
Details critical safety warnings for device installation and handling.
Guides on selecting an appropriate location with environmental and airflow considerations.
Provides options for mounting the switch: desktop, rack, or wall.
Steps for placing the switch on a flat surface, ensuring adequate ventilation.
Instructions for securely mounting the switch into a standard 19-inch equipment rack.
Procedure for mounting the device on a wall using a specific bracket kit.
Details on the RPS2-EIF unit, its features, and installation process.
Steps for inserting slide-in modules into available switch slots.
Procedure for inserting Small Form-factor Pluggable transceivers into ports.
Instructions for connecting power and turning on the FastIron LS switch.
Checks to confirm the device is functioning correctly after powering on.
Steps to connect a management station via serial port for initial configuration.
Details pinouts and wiring for serial console cable connections.
Securing Command Line Interface access by setting user and enable passwords.
Procedure to regain super-user access if the CLI password is forgotten.
Steps to assign IP addresses and default gateways for device management.
Specific instructions for configuring IP addresses on Layer 2 software devices.
Covers connectors, cable types, and connecting to various network devices via copper and fiber.
Methods to verify network connections using LEDs and general troubleshooting steps.
How to monitor and adjust temperature warning and shutdown levels.
Checking the current utilization of the device's management module CPU.
Guidelines for routine maintenance of the FastIron LS hardware components.
Steps for installing and replacing 10GbE modules in the switch.
Procedure for removing and installing SFP or XFP transceivers.
Detailed instructions on cleaning fiber optic connectors for reliable connections.
Configuring and viewing optical monitoring data for XFP modules.
A chart to help interpret LED status for diagnosing switch issues.
Troubleshooting steps for issues related to power supply and fan operation.
Verifying proper installation of all system components.
Troubleshooting network connectivity issues for remote management access.
Details physical dimensions, environmental, cooling, warranty, pinouts, and cables.
Specifications for operating temperature, humidity, and altitude during storage.
Presents Mean Time Before Failure (MTBF) results for the FastIron LS.
Information on the cooling system, airflow, and noise levels of the device.
Lists EMC, Immunity standards, and safety agency approvals for the device.
Details the warranty coverage provided for the FastIron LS family of switches.
Provides pin assignments for serial console and RJ-45 Ethernet ports.
Table detailing cable types, connector types, and length ranges for network connectivity.
Specifications for the integrated AC power supply unit.
Information regarding the power cords supplied with the FastIron devices.
Details for the optional RPS2-EIF, including features and dimensions.
Specifies the input connector properties for the power supplies.
Lists the electrical characteristics and input specifications for power supplies.
FCC compliance statement for Class A digital devices operated in commercial environments.
Canadian compliance statement for Class A digital apparatus.
Compliance statement for Class A products in domestic environments.
VCCI compliance statement for Class A information technology equipment.
Highlights potential hazards that could result in equipment damage.
Highlights potential hazards that could result in personal injury or death.
To Next Page
