Hardware Specifications
September 2007 © 2007 Foundry Networks, Inc. 2 - 11
Input Connector
Regulatory Compliance
This section contains regulatory standards for the power supplies, including the following:
• Electromagnetic Compatibility (EMC) compliance
• Immunity regulations
• Safety certifications
• Safety warning labels
• Environmental standards
Electromagnetic Compatibility (EMC) and Immunity Standards
The power supplies comply with the conducted and radiated test and immunity standards as listed in Table 0.16.
EMC standards are within a 6 dB minimum margin.
FCC CFR 47 Part 15 Warning:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
Table 0.15: Input Connector for Power Supplies
Power Supply Input Connector Properties
RPS2-EIF IEC socket 216C743-07)
C14 type: UL File No.: E29179,
CSA File No.: LR19980
Table 0.16: EMC and Immunity Standards for Power Supplies
Power Supply EMC Standards Immunity Standards
RPS2-EIF • ICES-003, Electromagnetic Emission
• FCC Part 15 Class A
• EN 55022/CISPR 22 Class A
• VCCI Class A
• EN 61000-3-2, Power Line Harmonics
• EN 61000-3-3, Voltage Fluctuation &
Flicker
• EN 61000-6-3, Electromagnetic
Compatibility, Generic Standard
• AS/NZS CISPR 22, Electromagnetic
Compatibility
• Harmonic Current Emissions (Class A) -
EN61000-3-2, with Amendment 14 (1999)
• EN 61000-6-1, Electromagnetic
Compatibility, Generic Standard
• EN 55024, Information Technology
equipment - Immunity Characteristics
To Next Page
Loading...
Need help?
General
