65
EN
Electrical connections:
Your machine is provided with a connection kit composed by a power supply unit with two sockets and a
switch/inverter.
You must fix this power supply unit to the base of the machine, and your circular saw and your miller
MUST
be
correctly connected to this power supply unit.
By pushing on the lever button of the switch/inverter, you can feed the socket of the miller or the one of the
circular saw. This connection prevents the accidental start of the two functions at the same time.
IN CASE OF USE OF THE MILLER FUNCTION, IT IS STRICTLY FORBIDDEN THE
DIRECT CONNECTION OF ONE OF THE TWO MACHINES TO A SOCKET WITHOUT
PASSING THROUGH THE SUPPLY INVERTER.
Figure 10
To Next Page
Loading...
