15
Event Blink Sequence
Ready for firmware update Solid purple
Firmware update in progress Solid blue
System Error 1 red blink every 1.5 seconds
LEVER LED REFERENCE
Event Blink Sequence
Battery has been inserted into lever 1 green blink every second for 5 seconds
Power o System goes to sleep after 5 minutes (no LED indication)
Enter lever pairing mode/after pressing
pairing button
1 green blink every 0.75 seconds
Remote lever pairing connected/waiting
for confirmation
Solid green
Controller pairing success 1 green blink every 0.5 seconds for 5 seconds
Controller pairing failure/lever
disconnected from controller
2 green blinks every second
CONTROLLER LED REFERENCE, CONTINUED
To Next Page
Loading...
