Foxconn A7DA 3.0 Series - Page 40

3
33
Voltage Options
► CPU Voltage Control
This option is used to change the CPU voltage in a step of 25mV. The voltage can be
incremented from +25mV to +775mV.
► Memory Voltage Control
This option is used to change the DRAM voltage in a step of 50mV. The voltage can be
incremented from +50mV to +600mV.
► NB Voltage Control
This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be
incremented from +30mV to +360mV.
► HT/SB Voltage Control
This option is used to change the HT/SB voltage in a step of 30mV. The voltage can be
incremented from +30mV to +360mV.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Voltage Options
CPU Voltage Control [Disabled] Help Item
Memory Voltage Control [Disabled]
NB Voltage Control [Disabled]
HT/SB Voltage Control [Disabled]
Disabled
+25mV
+50mV
+75mV
+100mV
+125mV
+150mV
+175mV
+200mV
+225mV
+250mV
+275mV
+300mV
+325mV
+350mV
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Disabled]
Options