Foxconn A7DA 3.0 Series User Manual

3
38
CKE pins per DRAM channel. For each channel :
[Channel] CKE control. The DRAM channel is placed in power down when all chip selects
associated with the channel are idle.
[Chip Select] CKE control. A chip select or pair of chip selects is placed in power down
when no transactions are pending for the chip select(s).
Integrated Peripherals
► IDE Configuration / USB Configuration / SuperIO Configuration
Press <Enter> to go to relative submenu.
► OnBoard 1394 Controller (only appears in A7DA 3.0-S)
This item is used to enable or disable the onboard 1394 controller.
► OnBoard LAN
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
► HD Audio Controller
This item is used to enable or disable the HD Audio Controller.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
► IDE Conguration
[Press Enter] Help Item
► USB Conguration
[Press Enter]
► SuperIO Conguration
[Press Enter] Congure the IDE
OnBoard 1394 Controller [Enabled] device(s).
OnBoard LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
HD Audio Controller [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]

Foxconn A7DA 3.0 Series Specifications

General

Brand	Foxconn
Model	A7DA 3.0 Series
Category	Motherboard
Language	English