EasyManuals Logo

Foxconn A7DA 3.0 Series User Manual

Foxconn A7DA 3.0 Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
1
2
1-1 Product Specications
CPU Support the AMD Phenom, AMD Athlon, AMD Sempron processor families,
AM3 socket processors
HyperTransport Up to 5200MT/s (HT3.0) for AM3 CPU
Chipset North Bridge: RS780D
South Bridge: SB750
Memory 4 x 240-pin DDR3 DIMM sockets
Support up to 8GB of system memory
Dual channel DDR3 1333/1066/800 MHz architecture
Audio Realtek 8-channel audio chip
High Denition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
Support Jack-Sensing function
LAN Broadcom Gigabit LAN chip
Expansion Slots 2 x PCI Express x16 slot
2 x PCI Express x1 slots
2 x PCI slots
Onboard Serial ATA 5 x SATA connectors
1 x ESATA connector
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
USB Support hot plug
Support up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB
headers supporting 6 extra ports)
Support USB 2.0 protocol up to 480Mb/s
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x IDE connector
5 x SATA connectors
1 x ESATA connector
3 x USB 2.0 connectors (supporting 6 x USB devices)
1 x CPU fan header (4-pin)
1 x System fan header (4-pin)
1 x NB fan header (4-pin)
1 x Front panel connector
1 x CD_IN connector
1 x Front Audio connector
1 x 1394a connector ( only for A7DA-S 3.0)
1 x IrDA connector
1 x Chassis intrusion alarm header (INTR)
1 x Speaker connector
1 x COM1 connector

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn A7DA 3.0 Series and is the answer not in the manual?

Foxconn A7DA 3.0 Series Specifications

General IconGeneral
BrandFoxconn
ModelA7DA 3.0 Series
CategoryMotherboard
LanguageEnglish

Related product manuals