Foxconn A7DA 3.0 Series User Manual

3
40
USB Conguration
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
USB Conguration
USB Conguration
Help Item
Module Version - 2.24.3-13.4 Enables support for
legacy USB.
USB Devices Enabled :
Auto option disables
None legacy support if
no USB devices are
Legacy USB Support [Enabled] connected.
USB 2.0 Controller Mode [High Speed]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]

Foxconn A7DA 3.0 Series Specifications

General

Brand	Foxconn
Model	A7DA 3.0 Series
Category	Motherboard
Language	English