EasyManuals Logo

Foxconn G31MXP User Manual

Foxconn G31MXP
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
28
3
Fox Intelligent Stepping
► FSB 1600 CPU Support ( Appears only if CPU supports FSB 1600)
This item will show and provide more options if your CPU is supporting FSB1600. If it is ena
bled, then FSB is set to 1600MH� and you can not overclock further. If it is disabled, then you
can use other items in this menu to congure your system.
► Fox Intelligent Stepping (FIS)
You can select different overclock option by this item. The available setting values are : [De-
fault], [Manual], [Step1], [Step2] and [Step 3].
[Default] - System will automatically adjust its CPU clock based on the current loading in run-
ning O/S and application programs.
[Step 1] - CPU is overclocked by a BIOS preset value. Each CPU with different speed has its
own set of preset value.
[Step 2] - Same denition as [Step 1].
[Step 3] - Same denition as [Step 1].
[Manual] - It means you can manually select a CPU clock to run your system. Any selected
setting must be saved and exit BIOS to activate it. More detailed descriptions of FIS
feature can be found in FOX ONE utility of Chapter 4.
The following 3 settings are valid only when the Fox Intelligent Stepping is set to [Manual].
► CPU Clock
This option is used to adjust the CPU clock.
Note: Before you adjust CPU Clock, it is recommended to adjust PCI Express Clock rstly. If
you directly adjust CPU Clock, maybe the system will not work at the speed you adjusted or
the system will hang.
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► Spread Spectrum
If you enabled this function, it can signicantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
Phoenix - AwardBIOS CMOS Setup Utility
Fox Intelligent Stepping
Fox 1600 CPU SupportFox 1600 CPU Support [Disabled] Item Help
Fox Intelligent Stepping [Fox Intelligent Stepping [Default]
CPU Clock 266MH� Menu Level ►
PCI Express Clock 100MH�
Spread Spectrum Enabled Enabled
CPU Multiplier Adjust [ 12 X]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimi�ed Defaults
Disabled

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn G31MXP and is the answer not in the manual?

Foxconn G31MXP Specifications

General IconGeneral
Form FactorMicro ATX
ChipsetIntel G31
SocketLGA 775
Memory TypeDDR2
Memory Slots2
Maximum Memory4 GB
Expansion Slots1 x PCIe x16, 2 x PCI
Storage Interface4 x SATA 3Gb/s, 1 x IDE
Integrated GraphicsIntel GMA 3100
AudioRealtek ALC662 6-Channel HD Audio
USB Ports8 x USB 2.0 (4 rear, 4 via headers)
Video Outputs1 x VGA
Supported CPUsIntel Core 2 Quad, Core 2 Duo, Celeron
LANRealtek RTL8102EL 10/100 Mbps

Related product manuals