Foxconn G31MXP User Manual

29
3
you had better disable it.
► CPU Multiplier Adjust
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be displayed
only if your CPU is supporting this feature.
Voltage Options
► CPU Voltage
This option is used to change the CPU voltage.
► DRAM Voltage
This option is used to change the DRAM voltage.
CPU Configuration
Phoenix - AwardBIOS CMOS Setup Utility
Voltage Options
CPU Voltage [Default] Item Help
DRAM Voltage [Default]
Menu Level ►
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimi�ed Defaults
Default
Phoenix - AwardBIOS CMOS Setup Utility
CPU Conguration
Limit CPUID MaxVal [Disabled] Item Help
C1E Function [Auto]
Execute Disable Bit [Enabled] Menu Level ►
EIST Function [Enabled]
Virtuali�ation Technology [Enabled] Set Limit CPUID MaxVal
to 3, it should be
“Disabled” for WinXp
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimi�ed Defaults
Disabled

Foxconn G31MXP Specifications

General

Form Factor	Micro ATX
Chipset	Intel G31
Socket	LGA 775
Memory Type	DDR2
Memory Slots	2
Maximum Memory	4 GB
Expansion Slots	1 x PCIe x16, 2 x PCI
Storage Interface	4 x SATA 3Gb/s, 1 x IDE
Integrated Graphics	Intel GMA 3100
Audio	Realtek ALC662 6-Channel HD Audio
USB Ports	8 x USB 2.0 (4 rear, 4 via headers)
Video Outputs	1 x VGA
Supported CPUs	Intel Core 2 Quad, Core 2 Duo, Celeron
LAN	Realtek RTL8102EL 10/100 Mbps