Foxconn G41MD - Superio Configuration; Serial Port1 Address

3
38
SuperIO Conguration
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Serial Port1 Mode
This item enables you to determine the transfer mode of the serial port 1.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Conguration
SuperIO Configuration Help ItemSuperIO Configuration Help Item
Serial Port1 Address [3F8/IRQ4] Allows BIOS to Select
Serial Port1 Mode [Normal] Serial Port1 Base
Addresses . Addresses . Addresses .Addresses .
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[3F8/IRQ4]