Foxconn H61MXP Series - Trusted Computing

BIOS SETUP
33
►DeviceMode
This item is used to change the parallel port mode.
Trusted Computing
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
TPM Configuration
TPM SUPPORT [Disabled]
Current TPM Status Information
NO TPM Hardware
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Advanced
►TPMSUPPORT
This item is used to decide whether to support TPM (Trusted Platform Module) device func-
tion.Defaultoptionis[Disabled].IfyouwanttosupportTPM,rstyouneedtoinstallaTPM
device on the motherboard and set this item to [Enabled], then save changing and reset your
computer, otherwise the operation system can not show the relative information.