BIOS SETUP
36
►ResumebyPS2KB/Mouse
Thisitemisusedtoenable/disablethePS2keyboard/mousetogenerateawakeup.
►ResumebyUSBDevice(s)
This item is used to wake up the system by a USB device when it is staying at S3 state.
►ResumebyPCIEDevice(s)
This item is used to enable/disable the PCI Express device to generate a wake up.
►ResumeByPCIPME
This item is used to enable/disable the PCI device to generate a wake up.
►ResumebyModemRing
This item is used to enable/disable the modem ring to generate a wake up.
►ResumebyOnboardLAN
This item is used to enable/disable the onboard LAN to generate a wake up.
►ResumebyRTC
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
►RTCAlarmDate(Days)
WhenResumebyRTCisenabled,selectaspecicdatetogenerateawakeup.
►RTCAlarmTime(HH:MM:SS)
WhenResumebyRTCisenabled,selectaspecictimetogenerateawakeup.
►Energy-usingProducts
This item is used to enable/disable the EuP(Energy-using Products) feature. When enable,
thesuspendpowerofthechipsetwillbecutoffinS5suspendmodeinordertoreducethe
power consumption of motherboard.
Enabled:S1/S3/S4isnormal,S5wakeuponlybypressingthepowerbutton.
Disabled: Normal ACPI function.
►RestoreACPowerLoss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.