Foxconn M61PMV Series - Page 102

5
95
15. After Setup copies les from RAID oppy diskette 2 to the Windows installation
folders, it then will ask you to insert the rst RAID diskette into oppy drive again.
Press [Enter] to continue when it is done.
16. Again, after Setup copies les from RAID oppy diskette 1 to the Windows
installation folders, it then will ask you to insert the second RAID diskette into
oppy drive. Press [Enter] to continue when it is done.
17. Setup will be coping les to the RAID disk array to create your new Windows XP
system. You can follow the normal procedures to complete the installations.
Windows Setup
Insert the disk labeled :
NVIDIA RAID DRIVER (SCSI) disk 1
into drive A:
* Press ENTER when ready.
F3=Quit Enter=Continue
Windows Setup
Insert the disk labeled :
NVIDIA RAID DRIVER (SCSI) disk 2
into drive A:
* Press ENTER when ready.
F3=Quit Enter=Continue